d_{ϵЮaƷ

ǰλ: > ܷλ > ܷλRM150-H1
ܷλRM150-H1

wwww.ҹҹߣ,ɫС˵,óվ

{eܷλ
gλ: ֵ(Ohms) : 500~2M ֵƫ: 20% ֵ׃: B ~ : 0.3W(50);0.1W(70) ʹ늉: 50VAC 20VDC K: R50K 20MAX R50K 50MAX Cе: DǶ: 265 5

ڣ2019-11-19  Դwww.gefcountrysupport.org

ʜyԇʴ_ԭҪŽc

ԭҼyԇ늉

wwww.ҹҹߣ,ɫС˵,óվϵ() ֵҼ㲻ں܌늉ȱֲ׃WķɌˁKmáؗl£^͵늉ȣ늌S늉Ӷӣϵֲֵ׃^Ҽ늉ᣬxӻ\Ӽӄ늌hȜyԇ늉ӵĿ죬ϳʬFֵѸٽ͡ɴ˿ҊӜyԇ늉ԽߣϵֵԽͣڲͬ늉œyԇõIJֵ^IJe

  • (7)
  • It should be noted that the electric field strength at the time of the test, rather than the test voltage, is the determinant of the change in material resistance. For the same test voltage, if the distance between test electrodes is different, the test result of material resistivity will also be different. The smaller the distance between positive and negative electrodes, the smaller the test value will be

    ԭ֔_

    ߽^ϼֱ늉ᣬͨ^ԇӵǺ΢СģOܵ֔_Ӱ푣^Ĝyԇ`늄ݡ|늄ҼСԺ;늽늄Ҫdzԇcͬٽ|aģsֻ20mVro늜yԇоҪ^ͣڎhМyԇr늽늄ݡˣ֔_Ҫsɢϻo늸Бa늄ݡڜyԇС10-10Ay賬^1011Wķr;yԇӡyԇ늘O͜yԇϵyȡδʩ֔_Ӱ푡

    ԭyԇrg

  • (13)
  • Ҽֱ늉yϼӉryϵ˲r_ֵģҼ˥p^̡ڼӉͬr^^ijDZ^LrgpС_^ƽ늌yֵԽߣ_ƽĕrgtԽLˣyr_xȡyֵڷxȡֵȡӉ 1xֵ

    ⣬wwww.ҹҹߣ,ɫС˵,óվϵֵ߀c䎧늵ĚvʷPʴ_urϵoܣڌM()yԇrȌM̎KoҼĕrgoÕrgȡ5犣ȻᣬٰyyԇҼԣҼNϵĜyԇّSCȡ35ԇMМyԇƽֵyԇY

    ԭġh؝

    ҼϵֵSh؝ȵ߶pСԣ()hȱ^Уw()tض^Сӣй©w늌Ҳӡضߣdӵ\ʼӿ죬|ϵ늌ӣPYψҼ|70 CrֵH20 Cr10%ˣyϵrָԇch_ƽĜ؝ȡ

  • (49)
  • ԭ塢yԇOй©

    105/5000 In the test, the connection line with low insulation resistance is often improperly connected with the tested sample and sampling resistance, which may have a great impact on the measurement results. Therefore, in order to reduce the measurement error, protection technology should be adopted to install the protective conductor on the line with large leakage current to basically eliminate the influence of stray current on the test result;

    늉춱xҼй©ԱMø߽^󾀏ĸ߉߉ݔKMsBpټˣŽ^늕;þϩwwww.ҹҹߣ,ɫС˵,óվȽ^yԇ_֧wԱԓԭœyԇֵƫ͡

     

    © d_޹˾ ICP12007546̖-2
    ַи^к·100BB13M |Wվ؈D